The front and left panels of this case are made of tempered glass 4 mm thick
DeepCool has added another variation of the Matrexx 55 case, released in August 2018, to its catalog. Unlike the Matrexx 55 PWM 2F variant, which we recently talked about, the Matrexx 55 V3 case is not equipped with fans, and its front panel is made of glass rather than mesh.
DeepCool catalog replenished Matrexx 55 V3 case
The case dimensions of 446 x 210 x 479 mm are designed for boards up to E-ATX. It has room for seven expansion cards up to 370 mm long. It is possible to install a video card parallel to the system board, but in this case, its length should not exceed 340 mm.
The maximum allowable height of the processor cooling system is 165 mm, and the maximum length of the power supply located in the lower compartment is 170 mm. Near the power supply,
Although the case is not equipped with fans, up to six fans can be installed in it: three 120 mm or 140 mm on the front wall, two 120 mm or 140 mm on the top and one 120 mm on the back. When using a coolant, a radiator with a length of up to 360 mm is placed on the front wall, up to 280 mm on the top, and 120 mm on the back.
The front and left panels are made of tempered glass with a thickness of 4 mm. The front panel is decorated with addressable LED backlighting. The I / O panel on top has a USB 3.0 connector, two USB 2.0 connectors, and microphone and headphone jacks.
According to the source, the case costs $ 49.
there is a place for two drives of standard size 3.5 or 2.5 inches. Attachment points for two more 2.5-inch drives are on the system board tray.
