Thermaltake S100 is designed for mini-ITX and microATX motherboards
Thermaltake introduced the S100 chassis, designed for mini-ITX and microATX motherboards. It is available in a completely black version and the Snow Edition version, which uses a combination of black and white. In both cases, the side panel is made of tempered glass 4 mm thick.
Thermaltake S100 encloses a 200mm fan on top of the chassis
Inside the case is divided into two compartments. In the lower compartment there is a power supply unit up to 16 cm long and two drives of standard size 3.5 inches. Of course, instead of these drives, you can put 2.5-inch drives. In the upper compartment is the motherboard and expansion cards. Expansion cards up to 33 cm long are placed in the case. The maximum height of the processor cooling system is 16.5 cm. In addition, two more 2.5-inch drives can be attached to the system board.
On the front and top panels there are two mounting points for fans of standard size 120 or 140 mm. As an alternative, one 200 mm fan can be installed on top. There is room for one 120 mm fan on the back. In the case of using the coolant system, it is possible to install a radiator up to 280 x 140 mm in size above and in front.
A USB 3.0 port connector and two USB 2.0 port connectors are located on the I / O panel. Case dimensions are 411 x 220 x 441. The manufacturer does not name prices.
