It is valued at 82 USD
Enermax introduced the libllusion LL30 RGB (ECA-LL30-M1BB-ARGB) case, designed for computers based on an ATX, microATX, or mini-ITX motherboard.
Enermax libllusion LL30 RGB enclosure equipped with six-channel addressable backlight concentrator
In addition to the board, in a case measuring 424 x 205 x 480 mm with a side panel of glass, up to seven expansion cards with a length of up to 375 mm are placed. The maximum allowable height of the processor cooling system is 157 mm. In the lower part of the case, there is a place for two drives of standard size 3.5 or 2.5 inches. You can install two more 2.5-inch drives on the system board tray.
A 120mm fan is mounted on the front of the chassis. In total, up to three 120 mm fans or up to two 140 mm fans are located there. You can mount one or two 120mm or 140mm fans on top. On the back wall, the manufacturer installs a 120mm SquA RGB fan with backlight. The front panel is also illuminated. A feature of the case is the integrated backlight controller hub, designed to connect up to six devices with ARGB backlight and compatible with Asus, Asrock, MSI, and Gigabyte backlight control systems. As an alternative to the software from the system board kit, you can use the backlight control button, which is located on the I / O panel, where you can also see the plugs of the two USB 3 ports covered with plugs.
When using the coolant system, a radiator up to 360 mm long can be mounted on the front wall, on top – up to 280 mm long, and on the back – 120 mm.
The case is estimated at 82 USD.
