Reliable characteristics of video cards GeForce RTX 3090 and RTX 3080 named

0
262

Reliable characteristics of video cards GeForce RTX 3090 and RTX 3080 named

According to the resource VideoCardzciting its sources, NVIDIA is going to release three models of graphics cards based on the Ampere architecture in September – GeForce RTX 3090 with 24 GB of video memory, RTX 3080 with 10 GB of memory and RTX 3070 with 8 GB of memory. Also, the partners of the graphics chip manufacturer will present the second version of the GeForce RTX 3080, equipped with 20 GB of video memory.

NVIDIA-GeForce-RTX-3090-Hero
NVIDIA-GeForce-RTX-3090-Hero

The resource indicates that the release time of the aforementioned 20GB model has not yet been determined, so the card may not appear in September. Therefore, while the sources were ready to share official technical information exclusively about the upcoming models RTX 3090 24 GB and RTX 3080 10 GB. In addition, images with fragments of the packaging of reference samples of these models have become available.

The NVIDIA GeForce RTX 3090 graphics card reportedly uses the GA102-300 processor with 5248 CUDA cores and is equipped with 24 GB of GDDR6X video memory with a 384-bit bus and a performance of 19.5 Gb / s per pin. This brings the theoretical memory bandwidth to 936 GB / s. Non-standard versions of the video card will be equipped with two 8-pin power connectors since the declared TGP ( Total Graphics Power ) level for this model will be 350 watts.

The GeForce RTX 3080 model received 4352 CUDA cores and 10 GB of GDDR6X video memory. Thanks to the use of the 320-bit bus, the maximum memory bandwidth of this model will be 760 GB / s, and its speed – 19 Gb / s. The declared value of the TGP level of the novelty is 320 W. Variants of this card from NVIDIA partners will also receive two 8-pin power connectors.

With the announcement of consumer graphics cards based on the Ampere microarchitecture, NVIDIA will unveil the second generation of Ray Tracing Cores as well as the third generation of Tensor Cores. The new cards will receive support for the PCI Express 4.0 interface. In addition, Ampere-based gaming solutions will be equipped with HDMI 2.1 and DisplayPort 1.4a connectors.

Also Read:   NVIDIA Unveils Reference GeForce RTX 3090. Unusual Design and 12-Pin Power Connector Confirmed

The GeForce RTX 3070 reference model is expected to be released by the end of next month (if nothing changes). It will receive 8 GB of video memory of the GDDR6 standard (not X), the speed of which will be about 16 Gbit / s per contact. The TGP level value of the card will be 220 W. The number of CUDA cores in its GPU is still unknown.

According to data leaked to VideoCardz, the Ampere series GPUs will be manufactured using a 7nm process technology. However, this information has not yet been officially confirmed.